Connector Panel Configuration - Sony BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA Operation Manual

Connector Panel Configuration

The unit comes standard with connectors for one
channel of Y/P /P or GBR. By adding the optional
B R
decoder adaptor or input expansion adaptors, the input/
output connector panel can be assembled in a wide
variety of configurations. The signals that each of the
adaptors' connectors supports are given in the table
below. The type of signal to be applied to each input/
output connector is set with the INPUT
CONFIGURATION menu.
Notes
• One BKM-22X can be attached simultaneously with
the BKM-20D or BKM-21D.
• The BKM-20D, BKM-21D and BKM-22X can not
provide proper active-through outputs if a signal
whose format is not selected in the INPUT
CONFIGURATION menu is input. (If AUTO is
selected, input a signal which has the same format
with the signal monitored last.)
For information about the INPUT CONFIGURATION
menu, see "[C1] Setting the Input Configuration (SET UP 1)
— INPUT CONFIGURATION Menu" on page 35.
Priority of the decoder adaptors
When multiple decoder adaptors for NTSC or PAL
format are installed, their priority is as in the following
table.
Example: To monitor the composite NTSC signal
when the BKM-24N and BKM-27T are installed, the
input composite NTSC signal is always decoded by the
BKM-24N.
Decoder adaptor
Input signal and
its format
BKM-24N BKM-25P BKM-27T BKM-21D
NTSC 1
Composite
signal
PAL
1
NTSC
YC
signal
PAL
3 2
1 3 2
2
1 2
BKM-41HD
Adaptor
HD SDI
name
Input
Signal
Adaptor
format
Serial Component
525/625
digital
Composite
input
NTSC
Composite
PAL
HD SDI
Composite
Analog
NTSC
input
Composite
PAL
Composite
PAL-M
Composite
SECAM
YP P
B R
525/625
GBR
525/625
Y/C
NTSC
Y/C
PAL
Y/C
PAL-M
YP P /GBR
B R
1080/48I
YP P /GBR
B R
1080/50I
YP P /GBR
B R
575/50P
YP P /GBR
B R
480/60P
YP P /GBR
B R
1035/60I
YP P /GBR
B R
1080/60I
YP P /GBR
B R
720/60P
Number of digital
inputs
Number of analog
input
Signal can be reproduced with this adaptor.
Signal can be reproduced when using this adaptor
together with an adaptor marked with
1) Equipped with floating/non-floating ground mode selected
for hum reduction.
BKM-42HD BKM-48X
HD SDI HD
Input Analog
Adaptor Expansion
Adaptor
1
2 –
1 1
6
.
(continued)
1)
7