gefran SIEIDrive AVy Series Quick Start Up Manual page 21

Vector ac drives
Table of Contents

Advertisement

Control
Text reference
buttons
Jog
[Increase] / [Jog]
[Decrease] / [Rotation control]
Help
[Down arrow] / [Help]
Alarm
[Up arrow] / [Alarm]
Escape
[Left arrow] / [Escape]
Home
[Enter] / [Home]
Enter
Shift
[START]
[STOP]
[Shift]
—————— Quick Start up ——————
Function
START button commands the Drive to the Enable (Stop control
function ON) and Run state (Main commands = DIGITAL)
When Main commands is set as TERMINALS the button is
not active
STOP button commands to stop the Drive from the Run state
when Main commands is set as DIGITAL
(Pressing this button for 2 sec, the drive will be disabled).
When Main commands is set as TERMINALS the button is
not active.
Plus button increases the speed reference for Motor pot function.
JOG command, when shift button is selected.
Minus button decreases the speed reference for Motor pot
function.
Rotation control, it changes the motor rotation direction in Jog
mode and Motor pot function when shift button is selected.
Down arrow - Used to change menu or parameter selection.In
parameter and reference setting modes, it changes the value of
the parameter or the reference.
Help – Function Not available ("Help not found" displaying
when pressed and when shift button is selected)
Up arrow - Used to change menu or parameter selection.
In parameter and reference setting modes, it changes the value
of the parameter or the reference.
Alarm - Failure register displaying ( shift selected). Use the UP/
DOWN Arrows to scroll through the last 10 alarms.
Left arrow, when editing numeric parameters it selects the digit
of the parameter to modify. In the other cases it is used to exit
from setting mode.
Escape - Used to exit from setting mode and (Reset) Alarm
displaying mode (when shift button is selected)
[Enter] - Used to [Enter] a new value for a parameter in the
parameter setting mode.
Home - Used to go directly to BASIC MENU (when shift button
is selected)
Shift button enables the second keypad functions (Rotation
control, Jog, Help, Alarm, Escape, Home)
QS
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents