Signalization Of Multiplier Function; Increasing, Decreasing The Travel Speed By Two Gears; Multiplier Preselection Switch; Multiplier Pre-Selection Signalization - Zetor FORTERRA HD Series Operator's Manual

Signalization of multiplier function

Individual engaged gears of multiplier are signalized by
a sign (1) in the left upper corner of the display.
The highest gear (the fastest)
Middle gear
Lowest gear (the slowest)

Increasing, decreasing the travel speed by two gears

2xH Increases the travel speed by
two gears
2xL Decreases the travel speed by
two gears

Multiplier preselection switch

Multiplier pre-selection switch is located on the control
panel on the right rear mudguard. Engaging the switch is
signalized by a lit symbol on the switch.
If the preselection switch is offthe gears of multiplier can
be engaged by buttons on the gear shifting lever
If the preselection switch is on (b) the gears of multiplier
are shifted automatically depending on engine revolutions
according to pre-saved values.

Multiplier pre-selection signalization

The switch of multiplier reselection switch is signalized by
a sign (1) on the display of dashboard.
DRIVING OPERATION
60 60
FHD14N046
FH12N054
FHD14N052
FHD14N047