Signalization of multiplier function
Individual engaged gears of multiplier are signalized by
a sign (1) in the left upper corner of the display.
3
The highest gear (the fastest)
2
Middle gear
1
Lowest gear (the slowest)
Increasing, decreasing the travel speed by two gears
2xH
Increases the travel speed by
two gears
2xL
Decreases the travel speed by
two gears
Multiplier preselection switch
Multiplier pre-selection switch is located on the control
panel on the right rear mudguard. Engaging the switch is
signalized by a lit symbol on the switch.
If the preselection switch is offthe gears of multiplier can
be engaged by buttons on the gear shifting lever
If the preselection switch is on (b) the gears of multiplier
are shifted automatically depending on engine revolutions
according to pre-saved values.
Multiplier pre-selection signalization
The switch of multiplier reselection switch is signalized by
a sign (1) on the display of dashboard.
DRIVING OPERATION
76
C15N065
FH12N054
C15N067
C15N066