Display - resetting data
Resetting data marked with an arrow can be done on
a display (4) and (5). Select display (4) or (5) with a button
(A) and by a longer pressing of button (B) reset data
marked with an arrow.
Display - manual brake
If the tractor is not braked by a manual brake, a warning is
displayed on a display (letter P in a circle) and at the same
time a sound signal is heard. See the chapter 'Driving
operation' for more.
Brake the tractor by a manual brake.
Display - error messages
Serious faults in the system (1)
STOP sign, number of fault (1) is displayed on a display
with serious faults.
If this situation occurs, set the tractor aside and
contact service.
Less serious faults in the system (2) a (3)
With less serious faults in the system, the number of faults
(2) are displayed on the display for a time period of
approximately 5 seconds.
Then the display of fault is minimized to the main field. (3)
If this situation occurs, complete the work and
contact service.
See more in the chapter of 'Driving operation'.
ACQUAINTANCE WITH THE TRACTOR
38
38
FHD14N059
FH12N039
FHD14N002