Indication Of The Multiplier Function; Increasing, Decreasing The Travel Speed By Two Gears; Multiplier Preselection Switch - Zetor PROXIMA HS Series Operator's Manual

Indication of the multiplier function

Individual engaged gears of multiplier are signalized by
a sign (1) in the left upper corner of the display.
3 The highest gear (the fastest)
2 Middle gear
1 Lowest gear (the slowest)

Increasing, decreasing the travel speed by two gears

2xH Increases the travel speed by
two gears
2xL Decreases the travel speed by
two gears

Multiplier preselection switch

The switch of the multiplier pre-selection is located on the board of the instrument panel. Activation of the
switch is indicated with the activated symbol on the switch and the symbol in the instrument panel display.
If the switch of the multiplier pre-selection is switched off, the gears of the multiplier can be shifted on the
gear shift lever.
If the switch of the multiplier pre-selection is switched on, the gears of the multiplier are automatically shifted
depending on the engine revolutions according to the pre-stored values.
OPERATION
PW15N037
91
PW15N032
FH12N054