Signal Lamp Of Full Pushing Filter; Major Failures Signalization; Signalization Of Less Major Failure - Zetor FORTERRA HD Series Operator's Manual

Signal lamp of full pushing filter

Signal lamp of full pushing filter (1)
flashing when engine is running indicates oil
temperature lower than 20°C.More information in
chapter HYDRAULIC DEVICE.
glow when engine is running indicates full pushing
filter of gearbox distributor or full pushing filter of
hydraulics pump; the following defect code is
shown on the display:
520257 when the pushing filter of gearbox
distributor is full
520266 when the pushing filter of hydraulics pump
is full
Should this be the case, replace the pushing fiter
element according to the defect code.

Major failures signalization

A failure in the category of major failure is signalized by
a non-stop acoustic signal and the display of a number of
failure on the display.
(A) major system failure of travel clutches and reversing
(B) major engine failure
(C) major failure in front drive axle suspension
(D) major failure in hydraulic system
If this situation occurs, put the tractor at stand-
off and contact a garage forthwith

Signalization of less major failure

A failure in the category less major failure is signalized on the display by displaying the number of the failure
for a time period of approximately 5 seconds (1).
Then the display of failure is minimized to the main array (2).
All the functions of the tractor remain active; it can happen that some of the functions will not be full-fledged.
(A) less major failure of the system of travel clutches and reversing
(B) less major engine failure
(C) less major failure of front drive axle suspension
(D) less major failure in hydraulic system
If this situation occurs, finish work and contact a garage.
DRIVING OPERATION
FHD14N044
58 58
FHD14N043