Diesel Particle Filter - System Failures Signalization; Diesel Particle Filter Failure Codes - Zetor FORTERRA HD Series Operator's Manual

Diesel particle filter - system failures signalization

Failures in diesel particle system failure are
signalized by a red control lighting up on the dashboard
with engine running and subsequently by an acoustic
signal.
If the failure is not removed, it is signalized with any
following starting of the engine
The code of failure us displayed on a display (1) of the
displaying unit which is accessible after removing the right
cover of the steering console.
The failures are displayed on display (1) in a form of E:
double-figured code of failure
For example: E:36, number 36 representing the code of
failure
If failure is not signalized, operation data of diesel particle
filter system are displayed on the display.
The acoustic signal can be turned off by the button (2). If
the failure has not been removed, the acoustic signal is
active with repeated staring of the engine and can be
turned off again by the button (2).
If the key is in switchbox in 'I' position and the engine is
not started, approximately ten minutes later the diesel
particle filter system starts signalizing a failure. Switch the
key to '0' position and start the engine. The code of failure
on the display E:32 or E:33.

Diesel particle filter failure codes

Failure Operator´s activity
code E:
11, 12, 21, The tractor can be
22, 23, 31, worked without any
34, 35, 37, limitations, after
38, 41, 42, terminating your work,
51, 52, 61, contact authorized
62 service and report the
code of failure.
32, 33, Switch the key to '0'
position and start the
engine.
36 Regenerate diesel
particle filter.
DRIVING OPERATION
67 67
FH12N075