Height Adjustment Of The Lifting Draw-Bars; Fixed And Free Position Of The Lower Hydraulic Draw-Bars; Limiting Draw-Bars - Zetor FORTERRA HD Series Operator's Manual

Height adjustment of the lifting draw-bars

Extend the capstan (1) in the arrow direction and make
the adjustment by turning the capstan.

Fixed and free position of the lower hydraulic draw-bars

Fixed position of the lower hydraulic draw-bars (A):
The pin head (1) and washer (2) are installed horizontally.
Free position of the lower hydraulic draw-bars (B):
The pin head (1) and washer (2) are installed vertically.
The free position enables free connection of the tractor
and implement. In this case both the draw-bar ends may
move freely against each other as regards their height.

Limiting draw-bars

The limiting draw-bars - stabilizers (1) limit or completely
prevent lateral swinging of the lower draw-bars. The
adjustment of the left and right limiting draw-bar is
performed by turning of the draw-bar pipe, see arrow.
Both the limiting draw-bars must always be
installed on the tractor.
HITCHES
106 106
FHD14N085
E454
E455