Swann AMU pH-Redox Operator's Manual page 68

AMU pH-Redox
Program List and Explanations
5.1.3.3
5.1.3.3.1
5.1.40
5.1.40.1
5.1.40.2
5.1.4
66
Temp. Compensation: (only available for pH measurement)
Comp.: Choose the compensation model which fits best to your ap-
plication. Available compensation models:
Comp. We recommend
Nernst for potable water, waste water, swimming pools
non-linear for high purity water
coefficient for high purity water
Standards: (only visible if pH is selected)
A temperature curve is programmed for SWAN standard 1, pH 7
and SWAN standard 2, pH 9. If you want to use your own standards
you can readjust the temperature curve according to your stan-
dards.
Standard 1: Assign the measured pH value to the according tem-
perature from 0–50 °C in steps of 5 °C.
Standard 2: Assign the measured pH value to the according tem-
perature from 0–50 °C in steps of 5 °C.
Standard: (only visible if redox is selected)
Enter the mV value of the redox standard.
A-96.250.441 / 060619