Software Structure; Operation: Sensors - Swann AMU pH-Redox Operator's Manual

AMU pH-Redox
Operation
5.3.
Main Menu
Messages
Diagnostics
Maintenance
Operation
Installation
Messages
Pending Errors
Message List
Diagnostics
Identification
Sensors
Sample
I/O State
Interface
Maintenance
Calibration
Simulation
Set Time 23.09.06 16:30:00
Quality Assurance
Operation
Sensors
Relay Contacts
Logger
Installation
Sensors
Signal Outputs
Relay Contacts
Miscellaneous
Interface
42

Software Structure

1
Menu Messages 1
1.1
Reveals pending errors as well as an event history
(time and state of events that have occurred at an
earlier point of time).
It contains user relevant data.
Menu Diagnostics 2
2.1
Provides user relevant instrument and sample data.
Menu Maintenance 3
3.1
For instrument calibration, relay and signal output
simulation, and to set the instrument time.
It is used by the service personnel.
Menu Operation 4
4.1
User relevant parameters that might need to be
modified during daily routine. Normally password
protected and used by the process-operator.
Subset of menu 5 - Installation, but process-related.
Menu Installation 5
5.1
For initial instrument set up by SWAN authorized
person, to set all instrument parameters. Can be
protected by means of password.
A-96.250.441 / 060619