0B-24 MAINTENANCE AND LUBRICATION
Automatic Transmission Fluid Level Inspec-
tion
1) Inspect transmission case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level check.
3) Pull out dipstick and check fluid level.
For fluid level checking procedure, refer to "Fluid Level
Check at Normal Operating (Hot) Temperature (Hot Check)"
in Section 7B and be sure to perform it under specified con-
ditions. If fluid level is low, replenish specified fluid.
1. Dipstick
2. Clamp
3. FULL HOT mark
4. LOW HOT mark
Automatic Transmission Fluid Replacement
1) Inspect transmission case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level check.
3) Change fluid. For its procedure, refer to "Fluid Change" in
Section 7B.
1. Drain plug
Automatic Transmission Fluid Cooler Hose
Inspection
Check automatic transaxle fluid cooler hose for fluid leakage,
cracks, damage and deterioration.
Replace hose and/or clamp if any faulty condition is found.