Suzuki Wagon R Manual page 2862

1
A
1
(A)
1
4) Apply grease in the supplied parts to wheel side joint.
Grease color: Dark brown
Amount: Approximately 110 g (3.88 oz)
5) Fit wheel side boot onto grooves of housing and shaft.
6) Place new wheel side boot big band onto boot putting band
outer end (1) against forward rotation (2) as shown in figure.
2
7) Confirm that wheel side boot is not stretched or contracted,
and then fasten boot big band (1) securely using special tool.
Special tool
(A): 09943-55010 or 09943-57010
8) Place new wheel side boot small band (1) onto boot putting
band outer end (2) against forward rotation (3) as shown in
figure.
9) Confirm that wheel side boot is not stretched or contracted,
and then fasten boot small band (1) securely using special
tool.
Special tool
(A): 09943-55010 or 09943-57010
FRONT DRIVE SHAFT (Z13DT ENGINE MODEL) 4A3-9