Codabar Set Length 2 - Datalogic Gryphon 2D Series Product Reference Manual

1D Symbologies

Codabar Set Length 2

This feature specifies one of the bar code lengths for
on page
page 182
Mode. The length includes the bar code's start, stop, check and data charac-
ters. The length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
182. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CCBL2
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Codabar Length Control
Fixed Length on page 182
"Set Length 2"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Variable Length on
on page 303 for
Appendix D, Key-
~
183