Character Conversion; Character Conversion - Datalogic Gryphon 2D Series Product Reference Manual

Enter/Exit Programming Mode

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4
character pairs represented in hexadecimal ASCII values. The first character in
the pair is the character that will be converted. The second character in the pair
is the character to convert to. If the character to convert in a pair is FF, then no
conversion is done. See
programming instructions.
DEFAULT
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
104

"Character Conversion"

0xFFFFFFFFFFFFFFFF
(No character conversion)
Character Conversion
on page 292 for more detailed
Configure Character Conversion
CANCEL
Gryphon™ I GD/GBT/GM4500