Good Read Beep Type; Good Read Beep Frequency - Datalogic Gryphon 2D Series Product Reference Manual

Reading Parameters

Good Read Beep Type

Specifies whether the good read beep has a mono or bitonal beep sound.
DEFAULT
$CBPTY01
Good Read Beep Type = Bitonal

Good Read Beep Frequency

Adjusts the good read beep to sound at a selectable low, medium or high fre-
quency, selectable from the list below. (Controls the speaker's pitch/tone.)
$CBPFR01
Good Read Beep Frequency = Medium
DEFAULT
Product Reference Guide


Enter/Exit Programming Mode
$CBPTY00

Good Read Beep Type = Mono
$CBPFR00 
Good Read Beep Frequency = Low
$CBPFR02 
Good Read Beep Frequency = High
111