Industrial 2 Of 5 Set Length 1 - Datalogic Gryphon 2D Series Product Reference Manual

Enter/Exit Programming Mode

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
on page 158
Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 50 characters. See
for more detailed programming instructions.
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
196
195. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CU2L1
01 = Length 1 is 1 Character
DEFAULT
Industrial 2 of 5 Length
Fixed Length on page 158
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
representing your desired character(s). End by
pad
scanning the ENTER/EXIT bar code again.
CANCEL
Gryphon™ I GD/GBT/GM4500
Industrial 2 of 5
Variable Length
on page 302
Appendix D, Key-
~