Aiming Duration Timer
Specifies the frame of time the aiming pointer remains on after decoding a
label, when in trigger single mode.The range for this setting is from 1 to 255
seconds in 1-second increments. See
of this feature.
DEFAULT
Set Aiming Duration Timer
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
page 289
in "References" for a description
Aiming Off After Decoding
To configure, scan the ENTER/EXIT PROGRAMMING
MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters
in
representing your desired
Appendix D, Keypad
character(s). End by scanning the ENTER/EXIT bar
code.
CANCEL
Scanning Features
125