I 2 Of 5 Check Character Transmission; I 2 Of 5 Length Control - Datalogic Gryphon 2D Series Product Reference Manual

1D Symbologies

I 2 of 5 Check Character Transmission

Enable this option to transmit the check character along with I 2 of 5 bar code
data.
This feature is valid only when I 2 of 5 Check Character Calculation is enabled.
NOTE
$CI2CT01
I 2 of 5 Check Character Transmission = Send

I 2 of 5 Length Control

This feature specifies either variable length decoding or fixed length decoding
for the I 2 of 5 symbology.
Variable Length:
may be set.
Fixed Length:
DEFAULT
$CI2LC01
I 2 of 5 Length Control = Fixed Length
Product Reference Guide

For variable length decoding, a minimum and maximum length
For fixed length decoding, two different lengths may be set.

Enter/Exit Programming Mode
$CI2CT00
I 2 of 5 Check Character Transmission = Don't Send
DEFAULT
$CI2LC00
I 2 of 5 Length Control = Variable Length


171