Global Interface Features; Host Commands - Obey/Ignore; Usb Suspend Mode - Datalogic Gryphon 2D Series Product Reference Manual

Global Interface Features

The following interface features are configurable by all interface types. To set
features specific to your interface, turn to that section of this manual.
H
OST
USB S
Host Commands — Obey/Ignore
This option specifies whether the scanner will obey or ignore host commands.
When set to ignore, the scanner will ignore all host commands except for those
necessary for:
• service mode
• flash programming mode
• keeping the interface active
• transmission of labels.
DEFAULT
Host Commands = Ignore

USB Suspend Mode

This setting enables/disables the ability of the USB interface to enter suspend
mode.
USB Suspend Mode = Enable
Product Reference Guide
C — O
OMMANDS BEY
M
USPEND ODE on page 39
Enter/Exit Programming Mode
/I
GNORE
on page 39
Host Commands = Obey
DEFAULT
39