Gs1 Databar Expanded Length Control; Gs1 Databar Expanded Set Length 1 - Datalogic Gryphon 2D Series Product Reference Manual

1D Symbologies

GS1 DataBar Expanded Length Control

This feature specifies either variable length decoding or fixed length decoding
for the GS1 DataBar Expanded symbology.
Variable Length:
Fixed Length:
DEFAULT
$CXBLC01
GS1 DataBar Expanded Length Control = Fixed Length

GS1 DataBar Expanded Set Length 1

This feature specifies one of the bar code lengths for
Length Control on page
Length on page 151
151 Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 74 characters. See
for more detailed programming instructions.
Select GS1 DataBar Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
For variable-length decoding, a minimum length may be set.
For fixed-length decoding, two different lengths may be set.

151. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CXBL1
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
$CXBLC00
GS1 DataBar Expanded Length Control = Variable Length
GS1 DataBar Expanded
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL

Variable
Fixed Length on page
on page 302
Appendix D, Key-
~
151