Mazda MX-5 Miata Sport 2007 Manual page 221

2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
TRUNK LID OPEN CANCEL SWITCH REMOVAL/INSTALLATION
[ADVANCED KEYLESS SYSTEM]
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
3. Squeeze the tabs of the trunk lid opener cancel switch and pull it forward to remove it.
4. Disconnect the trunk lid opener cancel switch connector.
5. Remove the trunk lid opener cancel switch.
6. Install in the reverse order of removal.
Fig. 66: Identifying Trunk Lid Opener Cancel Switch And Tab
Courtesy of MAZDA MOTORS CORP.
TRUNK LID OPEN CANCEL SWITCH INSPECTION[ADVANCED KEYLESS
SYSTEM]
1. Remove the trunk lid open cancel switch.
2. Inspect for continuity between the trunk lid open cancel switch terminals.
If not as specified, replace the trunk lid open cancel switch.

: Continuity
Fig. 67: Trunk Lid Open Cancel Switch Continuity Table
Courtesy of MAZDA MOTORS CORP.
2007 Mazda MX-5 Miata Sport