Mazda MX-5 Miata Sport 2007 Manual page 298

1. Remove the deployed air bag module or pre-tensioner seat belt.
2. Put the air bag module or pre-tensioner seat belt in a plastic bag, seal the bag, and then dispose of it.
Fig. 73: Putting Air Bag Module Or Pre-Tensioner Seat Belt In Plastic Bag
Courtesy of MAZDA MOTORS CORP.
INSPECTION OF SST (DEPLOYMENT TOOL)
1. Before using the SST (49 H066 002), inspect its operation.
2008 Mazda MX-5 Miata Grand Touring
2008 RESTRAINTS Air Bag System - MX-5 Miata
deployed air bag module and pre-tensioner seat belt, wear gloves
and safety glasses.
Due to the adoption of 2-step deployment control in both the driver

and passenger-side air bag modules, depending on the impact force,
it is possible that inflator No. 2 might not operate (deploy). Before
disposing of the air bag module, always follow the inflator
deployment procedures and verify the complete operation
(deployment) of inflators No. 1 and 2.