1-1: Load - Korg Trinity Parameter Manual

1–1: Load
1–1: Load
Here you can load a selected file or directory into memory.
Use the Open button or Up button to select the desired file or directory, and then select the page
menu command "1–1B: Load Selected."
1–1a: Current directory
The currently selected directory to which commands will apply is called the "current directory."
The LCD shows the full pathname of the directories. A reguler slash character "/" is the directory
delimiter (the character that divides hierarchical levels).
Use "1–1h: Open button" and "1–1i: Up button" to change the current directory.
1–1b: Directory window
This area displays file information for the current directory.
When a file or directory is selected in this window, the selected file will be displayed in inverse
video. The directory window will show information about the file as explained in "1–1c: File icon"
through "1–1g: Saved time."
1–1c: File icon
The displayed icon will indicate the file type. For details on icons, refer to page 147 in this manual.
1–1d: Filename
The name of the file is displayed.
1–1e: Size
The size of the file (in kilobytes) is displayed.
1–1f: Saved date
The date (day, month, year) that the file was last saved is displayed.
However since the TRINITY does not contain an internal calendar or clock, you need to set the
date in "1–3E: Set Date/Time" before saving.
1–1g: Saved time
The time that the file was last saved is displayed.
However since the TRINITY does not contain an internal calendar or clock, you need to set the
time in "1–3E: Set Date/Time" before saving.
148
1–1a
1–1b
1–1c
1–1d
1–1e
1–1f
1–1g
1–1h
1–1i
1–1j
Page Menu
1–1A
1–1B