Korg Trinity Parameter Manual page 170

Various messages
Medium unavailable
Situation: A command was executed for a floppy disk whose format was other than MS-DOS
Action:
Medium write protected
Situation: The writing destination floppy disk is write protected.
Action:
Memory full
Situation: When editing a song, track, or pattern etc. in Sequencer mode, the total data of all
Action:
Situation: When realtime recording in Sequencer mode, the free memory in which recorded data
Action:
Situation: When loading a Standard MIDI File in Disk mode, the sequencer memory has filled up.
Action:
Memory overflow
Situation: While receiving exclusive data using the Save Exclusive command, the sequencer
Action:
Memory protected
Situation: The internal programs, combinations, or songs are protected.
Action:
N
No Data
Situation: When loading a Standard MIDI File, the file contains no events. Or when saving exclu-
No items were selected
Situation: In the Save All or Save Combi/Prog dialog box, no check boxes were checked.
No Medium
Situation: A floppy disk is not inserted.
Action:
No recording track specified
Situation: For realtime multitrack recording, you attempted to start recording when no tracks
Action:
Situation: For realtime single-track recording, you attempted to begin recording with the current
Action:
No space available on medium
Situation: You attempted to save a file or create a directory, but there was no free space on the
Action:
Not enough memory
Situation: When starting realtime recording in Sequencer mode, it was not possible to allocate the
Action:
162
2HD or 2DD.
Use a different floppy disk.
Turn off the write protect on the floppy disk, and execute the command once again.
songs has reached the sequencer data memory capacity, and the operation is not possi-
ble.
Increase the amount of free memory by deleting data from other songs, etc.
is stored has been used up, and recording has been halted.
Increase the amount of free memory by deleting data from other songs, etc.
Delete song data. (If necessary, save it before deleting.)
memory capacity was exceeded.
If you wish to receive two or more items of exclusive data, transmit them to the Trinity
separately.
Turn off write protect in Global mode, and execute loading once again.
sive data received by Save Exclusive, there is no data to save.
Insert a floppy disk.
were set to a track status of REC.
Set the track status to REC for the track(s) that you wish to record.
track as the MTR (master track).
Select a track 1–16 for recording, and begin recording.
floppy disk.
Either delete existing files, or use a different disk that has sufficient free space.
minimum free memory (memory for the bar events up to the recording start location,
etc.).
Increase the amount of free memory by deleting data of other songs, etc.