Korg Trinity Parameter Manual page 157

1–1h: Open button
Use this button to open a directory, and move the current directory to the next lower level.
This is available only when a directory is selected in "1–1b: Directory Window."
1–1i: Up button
Use this button to move the current directory to the next higher level.
If the current directory is the root directory (where the current directory display is only "/"), this
button is not available.
1–1j: Drive select
Select the disk that will be used for loading and saving.
The volume label of the disk will be displayed, and disks without a volume label will be indicated
as "no label."
With the standard system, only the internal floppy drive can be selected.
Page Menu Command
1–1A: Hide Unknown Files (check command)
If this is checked, undefined file types will not appear in the directory window. However this is
valid only if the current directory is a DOS directory.
1–1B: Load Selected
This command loads the file or directory selected in "1–1d: Directory Window" into internal mem-
ory.
When this command is selected, a dialog box will appear, but the dialog box that appears will
depend on the file from which you are loading data. (Refer to "a" through "p" below.)
a
PCG File
All Programs
All Combinations
All Drum Kits
Global Parameters
b e
All
Programs Combinations
c f
1 Bank
Programs Combinations
g
d
1
Program Combination
o p
Standard MIDI File EXL File
SMF Data Exclusive Data
j
h
All All
Drum Kits
Parameters
i
1 Bank
1 Drum Kit
Open Key Up Key
1
k
SNG File
All Songs
Global
l
1 Song
m n
All Tracks 1 Pattern
1–1: Load
149