Korg Trinity Parameter Manual page 38

3–2: Filter 1 Mod (Filter 1 Modulation)
Velocity To 1A
With positive (+) settings, the Filter 1 EG will change the cutoff frequency more greatly as you
play more strongly.
With negative (–) settings, the Filter 1 EG will operate in inverted polarity to change the cutoff fre-
quency more greatly as you play more strongly.
Velocity To 1B
Refer to the above explanation for "Velocity To 1A."
Intensity To A
Adjust the depth with which the Filter EG (set in "4–1: Filter 1 EG") will affect the cutoff frequency
of filter 1A and 1B.
With positive (+) settings, positive (+) EG levels set in "4–1a: Filter 1 EG Level/Time" will
brighten the sound, and negative (–) levels will darken the sound.
With negative (–) settings, positive (+) EG levels set in "4–1a: Filter 1 EG Level/Time" will darken
the sound, and negative (–) levels will brighten the sound.
Intensity To B
Refer to the above explanation for "Intensity To A."
Alternate Modulation
AMS (Alternate Modulation Source)
Select the source which will control modulation depth of the cutoff frequency of filter 1A and 1B.
With a setting of OFF, modulation will not be applied.
Intensity
Refer to "2–1f: Oscillator EG." The operation is essentially the same.
For details on how Alternate Modulation and the other AMS functions operate, refer to page 157
"8. Appendix" in this manual and to page 33 "About alternate modulation" in the Basic Guide.
3–2d: Filter 1 LFO
These settings adjust the depth of the cyclic change applied by the LFO (set in 4–2: Filter 1 LFO) to
the cutoff frequency of filters 1A and 1B.
JS(–Y) (Joy Stick (–Y))
As this setting is increased, moving the joystick toward you will cause the filter 1 LFO to have an
increasingly greater effect.
Aftertouch
As this setting is increased, pressing down on the keyboard will cause the filter 1 LFO to have an
increasingly greater effect.
30
Change in cutoff frequency (for positive (+) settings)
Note-on
Note-off
Softly played note
Settings of EG Intensity to 1A
Change in cutoff frequency
Lower values
Note-on Note-on
Note-off
Strongly played note
Higher values
[–99...+99]
[–99...+99]
Note-off
[–99...+99]
[–99...+99]
[OFF...Tempo]
[–99...+99]
[0...99]
[0...99]