Korg Trinity Parameter Manual page 159

g: If a .PCG file, a combination file, or a bank file is opened, and a 1 Combination file is selected
The selected 1 combination will be loaded into the combination number specified as the loading
destination.
In the tab 1 display, select a 1 combination file within a bank
1
file.
When this command is selected, the dialog box at right will
2
appear. If you wish to load a combination other than the one
selected in step 1 , re-select the desired combination.
3 Select the loading destination bank and combination.
To load the data press the OK button. To cancel loading,
4
press the Cancel button.
h: If a .PCG file is opened and a Drumkit file is selected
All drum kits in the .PCG file will be loaded.
1 In the tab 1 display, select a drumkit file within a .PCG file.
2 When this command is selected, the dialog box at right will
appear.
3 To load the data press the OK button. To cancel loading,
press the Cancel button.
4 On a TRINITY that does not have the PBS-TRI option
installed, the dialog box shown at right will appear when
you attempt to load a PCG file containing 24 drum kit pro-
grams.
Use the radio buttons to select the set of drum kits that you
wish to load, and press the OK button to load the drum kits.
To return to the previous display, press the Cancel button.
i: If a .PCG file or drum kit file is opened, and a 1 Drum kit file is selected
The selected 1 drum kit will be loaded into the drum kit specified as the loading destination.
In the tab 1 display, select a 1 drumkit file within the drumkit
1
file.
When this command is selected, the dialog box at right will
2
appear.
If you wish to load a drumkit other than the drumkit selected
1
in step , re-select the drumkit for loading.
Select the loading destination drum kit.
3
4 To load the data press the OK button. To cancel loading, press the Cancel button.
j: If a .PCG file is opened and a Global file is selected
In the tab 1 display, select a Global file within a .PCG file.
1
2 When this command is selected, the dialog box at right will
appear.
3 To load the data press the OK button. To cancel loading,
press the Cancel button.
k: If a .SNG file is selected
All data in the .SNG file will be loaded.
If the check box in the dialog box is checked, an identically-named file with an extension of .PCG
will also be loaded at the same time. However in this case, the .PCG file and the .SNG file must
exist in the same directory.
In the tab 1 display, select a .SNG file.
1
2 When this command is selected, the dialog box at right will
appear.
3 To load the data press the OK button. To cancel loading,
press the Cancel button.
1–1: Load
151