7-3: T1 E1 (Timbre 1-8 Edit Insert Effect 1); 7-4: T1 E2 (Timbre 1-8 Edit Insert Effect 2); 7-5: T1 E3 (Timbre 1-8 Edit Insert Effect 3); 7-6: T1 E4 (Timbre 1-8 Edit Insert Effect 4) - Korg Trinity Parameter Manual

7–3: T1 E1 (Timbre 1–8 Edit Insert Effect 1)
7–4: T1 E2 (Timbre 1–8 Edit Insert Effect 2)
7–5: T1 E3 (Timbre 1–8 Edit Insert Effect 3)
7–6: T1 E4 (Timbre 1–8 Edit Insert Effect 4)
These pages will be displayed if insert effects are selected in "7–2a: Insert Effect Setting."
Here you can make settings for insert effect parameters.
For details on effect parameters, refer to the separate Effect Guide.
Effect dynamic modulation occurs on the MIDI channels specified for each timbre.
Effect Name
Page Menu Command
7–3A: Write Combination
This command writes an edited combination into the specified combination number. Be sure to
write important combinations. If you turn the power off or select another combination before writ-
ing, it will not be possible to recover the edited data.
For details refer to Basic Guide page 23, "9. Writing a program or combination".
7–3: T1 E1 (Timbre 1–8 Edit Insert Effect 1)
Page Menu
7–3A
73