2-2: Osc1 Lfo (Oscillator 1 Lfo) - Korg Trinity Parameter Manual

2–2: OSC1 LFO (Oscillator 1 LFO)
2–2: OSC1 LFO (Oscillator 1 LFO)
Here you can make settings for the LFO that applies cyclic changes (vibrato) to the pitch of oscilla-
tor 1. The depth of the effect that these LFO settings will have on the pitch of oscillator 1 is
adjusted in "2–1g: Oscillator 1 LFO" (
2–2a: Waveform/Freq (Frequency)/Offset
Waveform
Selects the LFO waveform.
The numbers at the right of each waveform name indicate the phase (height) at which the wave-
form starts (except for Random).
Random 1–3 are sample & hold waveforms.
Random 1 is a conventional sample & hold waveform that changes level randomly at fixed inter-
vals.
Random 2 will change level randomly at random intervals.
Random 3 will change between the maximum level and the minimum level at random intervals
(i.e., a pulse wave with random width).
Random 4–6 are smoothed versions of Random 1–3. They can be used to simulate the natural
instability of acoustic instruments.
Freq (Frequency)
Specify the LFO frequency.
A setting of 99 is the fastest.
16
2–2a
2–2b
2–2c
LFO waveforms
Triangle 0
Triangle 90
Triangle 180
Triangle 270
Up Saw 0
Up Saw 180
Down Saw 0
Down Saw 180
page 14 in this manual).
Rectangle
Rectangle
Triangle wave
Sine
Sine
Guitar
Sawtooth wave
Random
Random
Random
Random
Sawtooth wave
Random
Random
Page Menu
2–2A
2–2B
2–2C
[Triangle 0...Random6]
0
Square wave
180
0
Sine wave
180
Guitar vibrato
1
2
3
Random
4
5
6
[0...99]