Korg Trinity Parameter Manual page 129

6–2H: Get From Track
This command copies musical data from a track into the pattern specified in the tab 2 display.
For details refer to "6–1H: Get From Track."
6–2I: Put To Track
This command places a pattern number in a track. Unlike the Copy To Track command, the musi-
cal data of the pattern will not actually exist in the track. When the song is played back and play-
back arrives at the pattern number, the specified pattern is called up and its data is played.
For details refer to "6–1I: Put To Track."
6–2J: Copy To Track
This command copies the contents (musical data) of the pattern specified in the tab 2 display to a
track. Unlike the Put To Track command, the data itself is recorded into the track, and editing the
copied data will not affect the pattern or other locations.
For details refer to "6–1J: Copy To Track."
6–2: Pattern Name
121