8-2: Edit E1 (Edit Master Effect 1 [Modulation]); 8-3: Edit E2 (Edit Master Effect 2 [Reverb/Delay]) - Korg Trinity Parameter Manual

8–2: Edit E1 (Edit Master Effect 1 [Modulation])
8–2: Edit E1 (Edit Master Effect 1 [Modulation])
8–3: Edit E2 (Edit Master Effect 2 [Reverb/Delay])
Here you can set the master effect parameters.
These pages will be displayed if a modulation-type effect and reverb/delay-type effect are
selected for [Modulation] and [Reverb/Delay] in "8–1a: Master Effect Setting".
Effect Dynamic Modulation is done on the Global MIDI channel.
For details on the effect parameters, refer to the separate Effect Guide.
Page Menu Command
8–2A: Memory Status
This command displays the remaining amount of sequencer memory.
128
Effect Name
Page Menu
8–2A