Korg Trinity Parameter Manual page 160

1–1: Load
l: If a .SNG file is opened and a 1 Song file is selected
The selected 1 song will be loaded into the song that you select as the loading destination.
1
2
3
4
m: If a .SNG file or a 1 song file is opened, and a Track file is selected
Event data of all tracks in the selected song will be loaded into the song that you select as the load-
ing destination. However, it is not possible to select a song that has not been created as the loading
destination.
1
2
3
4
n: If a .SNG file or a 1 song file is opened, and a 1 Pattern file is selected
The selected pattern will be loaded into the pattern of the song you select as the loading destina-
tion. However, it is not possible to select a song that has not been created as the loading destina-
tion.
1
2
3
4
o: If a .MID file or an undefined file is selected
The selected file will be assumed to be a Standard MIDI File, and will be loaded into the song that
you specify as the loading destination.
1
2
3
4
p: If an .EXL file is selected
1
2
3
152
In the tab 1 display, select a 1 song file within a .SNG file.
When this command is selected, the dialog box at right will
appear.
Select the loading destination song.
To load the data press the OK button. To cancel loading,
press the Cancel button.
In the tab 1 display, select a track file within a 1 song file.
When this command is selected, the dialog box at right will
appear.
Select the loading destination song.
To load the data press the OK button. To cancel loading,
press the Cancel button.
In the tab 1 display, select a 1 pattern file within a 1 song file.
When this command is selected, the dialog box at right will
appear.
Select the loading destination song.
To load the data press the OK button. To cancel loading,
press the Cancel button.
In the tab 1 display, select a .MID file or an undefined file.
When this command is selected, the dialog box at right will
appear.
Select the loading destination song.
To load the data press the OK button. To cancel loading,
press the Cancel button.
In the tab 1 display, select an .EXL file.
When this command is selected, the dialog box at right will
appear. All data in the .EXL file will be transmitted from
MIDI.
To load the data press the OK button. To cancel loading,
press the Cancel button.
After the data has been loaded from the .EXL file, it will be
transmitted via MIDI.