Arrow DECA User Manual page 7

The DECA board has many features that allow users to implement a wide range of designed circuits,
from simple circuits to various multimedia projects.
The following hardware is provided on the board:
 Altera MAX® 10 10M50DAF484C6G device
 USB-Blaster II onboard for programming; JTAG Mode
 512MB DDR3 SDRAM (16-bit data bus)
 64MB QSPI Flash
 Micro SD card socket
 Two CapSense buttons
 Two push-buttons
 Two slide switches
 Eight blue user LEDs
 Three 50MHz clock sources from the clock generator
 24-bit CD-quality audio CODEC with line-in, line-out jacks
 HDMI TX, incorporates HDM v1.4 features, including 3D video supporting
 One 10/100 Mbps Ethernet PHY with RJ45 connector
 One USB 2.0 PHY with mini-USB type AB connector
 One MIPI connector interface supports camera module application
 One proximity/ambient lighter sensor
 One humidity and temperature sensor
 One temperature sensor
 One accelerometer
 Two MAX 10 FPGA ADC SMA inputs
DECA User Manual
Figure 2-2 DECA development board (bottom view)
6
www.terasic.com
May 22, 2015