Demonstration Batch File
Demo batch file folder: Demonstrations/deca_usb_ulpi/demo_batch/
Batch file: test.bat
FPGA configure file: DECA_golden_top_time_limited.sof
Driver folder: /deca_usb_ulpi/demo_batch/app_driver/driver/windows/
Driver file: slsusb.Inf
Application file folder: /deca_usb_ulpi/demo_batch/app_driver/utilities/portinterface/
Application file: PortInterface.exe
Demonstration Setup
Please make sure Quartus II and USB-Blaster II driver are installed on the host PC.
Connect the USB cable from the USB-Blaster II port (J10) on the DECA board to the host PC.
Power on the DECA board.
Execute the demo batch file "test.bat" under the folder Demonstrations/deca_usb_ulpi/dem
o_batch/
Input "q" to quit the info for USB20SR IP as
Connect another USB cable from the USB port (J8) on the DECA board to the host PC.
Open the device manager and install the driver file for the unknown USB device.
After successfully installed the driver file, the USB2.0 device will be show as
DECA User Manual
Figure 7-27
Figure 7-27 Programming the SOF file
117
shows.
Figure
7-28.
www.terasic.com
May 22, 2015