Arrow DECA User Manual page 48

 System Configuration
Users are given the flexibility in the System Configuration to include their choice of components in
the project, as shown in
disable one or more components at will. If a component is enabled, the DECA System Builder will
automatically generate its associated pin assignment, including the pin name, pin location, pin
direction, and I/O standard.
 BBB Header
If user connect BBB daughter card to the BBB header on DECA, the DECA System Builder can
selection the desired pinout name as shown in
is the default and another is MODE 7. In default pinout, the pinout name is the same as DECA
schematic. If MODE 7, the pinout name is the same as the MODE 7 pinout name defined in BBB
product. If a prefer BBB pinout option is selected, the DECA System Builder will automatically
generate its associated pin assignment, including the pin name, pin location, pin direction, and I/O
standard.
DECA User Manual
Figure 4-4. Each component onboard is listed and users can enable or
Figure 4-4 System configuration group
47
Figure 4-5. There are two kind of pinout name. One
www.terasic.com
May 22, 2015