Arrow DECA User Manual page 132

9. Click Generate.
B. Write POF File into the CFM Device
When the conversion of SOF-to-POF file is complete, please follow the steps below to program the
EPCS device with the .pof file created in Quartus II Programmer.
1. Choose Programmer from the Tools menu and the Chain.cdf window will appear.
2. Click Hardware Setup and then select the Arrow MAX 10 DECA as shown in
3. Click Add File and then select the Dual_boot.pof .
4. Program the CFM device by clicking the corresponding Program/Configure and Verify box, as
shown in Figure
5. Click Start to program the CFM device.
DECA User Manual
Figure 8-15 Add sof Page and sof Data
8-17.
131
Figure 8-16.
www.terasic.com
May 22, 2015