Arrow DECA User Manual page 29

ADC1 and ADC2 respectively. With the amplifiers, the analog input of two SMAs support from
-6.25V to +6.25V range.
3.4.6 D D R 3
D D R 3
The board supports 512MB of DDR3 SDRAM comprising of one 16 bit DDR3 device. The DDR3
devices shipped with this board are running at 300MHz with the soft IP of MAX 10 external
memory interface solution.
FPGA. Table 3-11 shows the DDR3 interface pin assignments.
DECA User Manual
Figure 3-19 shows the connection of SMA connectors to the FPGA.
Figure 3-19 Connection of SMA connectors to the FPGA
M e m o r y
M e m o r y
Figure 3-20 shows the connections between the DDR3 and MAX 10
28
www.terasic.com
May 22, 2015