Arrow DECA User Manual page 129

3. Choose OK to return to the Quartus window. In the Processing menu, choose Start
Compilation or click the Play button on the toolbar to compile the project, generate the new .sof
file.
4. Use the same flow to add the Dual Configuration IP into DECA_Gsensor demo to generate the
new .sof file by internal configuration mode.
Finally, So far, we have successfully obtained two image .sof files for dual boot demo according
previous steps. this section describes how to generate .pof from .sof files with the internal
DECA User Manual
Figure 8-12 Device Window
128
www.terasic.com
May 22, 2015