Arrow DECA User Manual page 108

 Demo batch file folder: Demonstrations/ DECA_socket_server /demo_batch/
 Batch file: DECA_socket_server.bat
 FPGA configure file: DECA_socket_server.sof
 Application file folder: DECA_socket_server /demo_batch/
 Application file: open_telnet.bat
 Demonstration Setup
 Please make sure Quartus II and USB-Blaster II driver are installed on the host PC.
 Connect the USB cable from the USB-Blaster II port (J10) on the DECA board to the host PC.
 Power on the DECA board.
 Execute the demo batch file "DECA_socket_server.bat" under the folder Demonstrations/
deca_socket_server /demo_batch , then the IP address and port number are assigned as shown
below in Figure
 To establish connection, start the telnet client session by executing open_telnet.bat file and
include the IP address assigned by the DHCP server-provided IP along with the port number as
shown below in
DECA User Manual
7-16.
Figure 7-16 Simple Socket Server
Figure 7-17.
107
www.terasic.com
May 22, 2015