Arrow DECA User Manual page 22

Figure 3-14 Connections between the slide switches and the MAX 10 FPGA
There are also eight user-controllable LEDs connected to the FPGA. Each LED is driven directly
and individually by the MAX 10 FPGA; driving its associated pin to a high logic level or low level
to turn the LED on or off, respectively.
MAX 10 FPGA. Table
push-buttons, CapSense-buttons, switches, and LEDs.
Figure 3-15 Connections between the LEDs and the Cyclone V SoC FPGA
DECA User Manual
Figure 3-15
3-3, Table 3-4, Table 3-5
shows the connections between LEDs and
and Table 3-6
21
list the pin assignment of user
www.terasic.com
May 22, 2015