Firmware Update (Sub Control (Scb) / Engine (Ctl)) - Ricoh Ri 1000X User Manual

10. Appendix
After install completed, press [OPEN] when the screen below is displayed.
Panel (GIB) reboot automatically after press [OPEN].
Afterwards, Sub Control (SCB) and engine (CTL) start to update automatically.
IMPORTANT! You must not follow the steps different from the above.
The printer may become unrecoverable by user.

Firmware update (Sub Control (SCB) / Engine (CTL))

After sending the updater, wait until the dialog below disappears.
220
RICOH Ri 1000X User Manual