Added Display Of Print Remaining Time And Length; Checking Print Remaining Time And Length - Ricoh Pro L5130 Manual

Added Display of Print Remaining Time and Length

Added Display of Print Remaining Time
and Length

Checking Print Remaining Time and Length

[Overview]
Added the new function to display the print remaining time and length on the control panel.
[How to operate]
⚫
Print Remaining Time
The print remaining time is displayed on the top screen of the control panel. It alternates
with "Operational status or messages" when the printer is in the "Printing" or "Drying"
state.
Note:
- It shows the total remaining time including the printing and the drying after printing.
Also, it shows in minutes for up to 99 hours and 59 minutes.
- It shows the remaining time for one job currently being printed. Even if multiple jobs
are queued in RIP such as "Continuous Printing", the total remaining time of all jobs
cannot be displayed.
- This print remaining time is an approximate guideline and may not necessarily match
the actual time.
(e.g.)

If the data transmission to the printer is delayed due to the network
environment or the RIP PC performance, the actual printing time will be longer
than the displayed time.

If "Skip White Space" or "Skip White Areas" is set to "ON", the actual printing
time will be shorter than the displayed time. It can be work by changing the
RIP settings. For details, please refer to the separate "RIP Settings Guide".
4