CARDIOSTRONG EX20 Assembly And Operating Instructions Manual page 12

Step 3: Assembly - railing
Slide the washers (J7) in the
axle on the console mast
(B). Slide the left handle
(G1) into the axle and
mount it with washers (J6),
spring washers (J2), and
screws (J5).
Repeat the step for the
right handle (G2).
Step 4: Assembly - pedal bars
Loosen the pre-mounted screws (J4), spring washers (J2), and washers (J1). Mount the bracket (H5)
on the pedal bar with screws (J4), spring washers (J2), and washers (J1).
Repeat the process for the other side.
Pedal bars
12
EX20