Step-1 Initial Settings For The Air Conditioning System - Mitsubishi Electric AE-200A Instruction Book

7-3. Step-1 Initial settings for the air conditioning system

Make initial settings for the AE-200/AE-50/EW-50 using the Initial Setting Tool. Refer to the AE-200/AE-50/EW-50
Instruction Book (Initial Settings) for details.
② Connect LAN1 and the
Setting PC.
Step-1
HUB
Setting PC
(Obtain on-site)
Other
AE-200/AE-50/EW-50
*1 If the LAN1 connection between AE-200/AE-50/EW-50 is disconnected, then a communication error (6920) may be detected.
In this process, ignore the communication error (6920).
(1) Setting Tool installation
Install the Initial Setting Tool and BACnet
Setting PC.
(Refer to the AE-200/AE-50/EW-50 Instruction Book (Initial Settings) and the AE-200/AE-50/EW-50
Instruction Book (BACnet
(2) Connecting the Setting PC
Before connecting the Setting PC to AE-200/AE-50/EW-50, remove the LAN cable connected to BACnet
from LAN2 of AE-200/AE-50/EW-50.
AE-200/AE-50/EW-50 (LAN1) and the Setting PC are connected via a HUB.
(3) Setting IP address and expansion controller
Make settings related to the IP address of LAN1 of AE-200/AE-50/EW-50 and the expansion controller on
the AE-200/AE-50's LCD. (Refer to the AE-200/AE-50/EW-50 Instruction Book (Initial Settings) for the setting
method.)
The settings can also be made using Web Browser for Initial Settings (AE-200/AE-50/EW-50, IP address
only) or the Quick IP address setting switch (EW-50 only, IP address only).
The settings that can be made on the AE-200/AE-50's LCD are as follows.
No. Main tab
1
Initial Settings
2
WT07919X04
① Remove the LAN cable
from LAN2 port.
HUB
LAN2
LAN1
M-NET
AE-200/
Outdoor
AE-50/EW-50
unit
Outdoor
unit
*1
®
®
Setting Tool) for details.)
Sub tab
Network
Unit information
Building management system
®
BACnet
M-NET
Indoor unit
ME remote controller
M-NET
Indoor unit
ME remote controller
Setting Tool on the Setting PC, and set the IP address for the
38
HUB
LOSSNAY
LOSSNAY
®