Table of Contents
Advertisement
8. System Settings
8-1. Date/Time Settings
Click [System Settings] in the menu bar, and then click [Date/Time Settings] to access the date and time settings
screen.
Set the current date and time, and then click [Save Settings] to save the settings.
Note: The date and time settings may not be accessible if logged in as a building manager.
Note: The date and time settings made on this screen will be reflected on all the units in the M-NET system, all connected
AE-50 units, and the AE-200 units whose [Time Master] setting is set to [Sub].
Note: The date and time cannot be set on this screen if the [Time Master] setting is set to [Sub].
Note: The daylight saving time setting is required only on the AE-200.
Note: If the current time is moved forward while the scheduled operation is performed, the operation that was scheduled to take
place during the time that was skipped will not be performed.
Note: Changing the date and/or time when the charging function is in use can affect the calculation of the charges.
Note: When AE-50 controller, DIDO controller (PAC-YG66DCA), AI controller (PAC-YG63MCA), or PI controller (PAC-
YG60MCA) is added to the system, set the current date and time on this screen to synchronize the date and time on the
added controller.
Note: Although date and time settings can be made on each AE-50, the date and time synchronization from AE-200 is
performed once a day. Make the date and time settings on the AE-50 only after the AE-50 is replaced.
Daylight saving time
setting
Click to enable the daylight
saving time setting.
Refresh
Click to acquire the current
date and time from the
AE-200/AE-50.
(1) Enter the current date and time.
(2) To adjust the daylight saving time automatically, check the [Automatically adjust clock for daylight saving
changes] checkbox, and select the applicable country in the pulldown menu.
If the applicable country is not in the pulldown menu, select [Custom Settings] instead. A [Custom Settings]
button will appear on the right of the pulldown menu.
Click the [Custom Settings] button to open the Custom Settings screen, and configure the daylight saving
time setting.
WT07139X01
Custom Settings screen
52
Current date and time
Enter the current date and
time.
Save Settings
Click to save the changes
made.
Advertisement
Table of Contents
