Usage (System Configurations); Sample System Configurations - Mitsubishi Electric AE-200A Instruction Book

3. Usage (System configurations)

3-1. Sample system configurations

(1) When controlling 50 or fewer units of equipment and not using an apportioned electricity
billing function
HUB *1
LAN1
Setting PC *2
*1 Use a switching HUB to connect to LAN1 and LAN2 (BACnet
*2 A PC (hereafter referred to as Setting PC) is required to make settings for the AE-200/EW-50 BACnet
disconnect the Setting PC as well as LAN cables and HUBs used to connect to the Setting PC from the AE-200/EW-50. Refer to section
7 "Checking installation operations and performing trial run" for details.
WT07919X04
HUB *1
®
BACnet
LAN2
M-NET
AE-200
Outdoor unit
or
ME remote controller
Outdoor unit
EW-50
ME remote controller
Building management system
HUB *1
M-NET
Indoor unit
M-NET
Indoor unit
®
). Do not connect LAN1 and LAN2 (BACnet
7
LOSSNAY
LOSSNAY
®
) to the same HUB.
®
functions. After making settings,