Usage; Ae-200/Ae-50/Ew-50 Bacnet; Connection Mode - Mitsubishi Electric AE-200A Instruction Book

6. Usage (AE-200/AE-50/EW-50 BACnet
mode)

6-1. AE-200/AE-50/EW-50 BACnet

The AE-200/AE-50/EW-50 BACnet
Mode name
"ONLINE" mode
"OFFLINE" mode
Transition of "ONLINE" and "OFFLINE" mode is as follows.
The current mode can be checked using the BACnet
Activation when power
source is turned on
or restart
*1 Does not switch to the "ONLINE" mode in the following cases:
• When a valid "BACnet connection" license is not registered
• When inconsistency occurs in BACnet
• When the metering device is registered in the AE-200/AE-50/EW-50 "Measurement" settings or "PI Controller" settings, and the
corresponding BACnet
(Even if the target accumulator object is not required, enable it. "Measurement" settings can be configured on the Web Browser
for Initial Settings or AE-200/AE-50's LCD, and "PI Controller" settings can be configured on the Initial Setting Tool. Refer to the
AE-200/AE-50/EW-50 Instruction Book (Initial Settings) for settings methods.)
*2 When there are many setting groups, the time to migration to "ONLINE" mode gets longer. (maximum of approximately 10 minutes)
WT07919X04
®
function operates in the following two connection modes.
This is a mode while operating which carries out BACnet
This is a mode while maintenance and settings in which BACnet
"OFFLINE" mode
®
settings information, or before reflecting the initial BACnet
®
accumulator object (PIcontroller Electric Energy 1–4, Pulse Input Electric Energy 1–4) is not enabled
®

connection mode

Details
®
Setting Tool.
Transits automatically
When performing "ONLINE"
setting from the BACnet
Tool *1 *2
34
®
connection
®
communication.
®
communication does not occur.
*1 *2
"ONLINE" mode
When performing "OFFLINE"
setting from the BACnet
Setting Tool, or changing the
group/interlocked LOSSNAY/PI
controller settings from the Initial
Setting Tool and performing
"Send settings",
or changing the group/
interlocked LOSSNAY/
measurement settings from
®
Setting
AE-200/AE-50's LCD and
performing "Save Settings"
"OFFLINE" mode
®
settings
®