Mitsubishi Electric AE-200A Instruction Book page 18

Classification
Alarm Signal (Air conditioning
Alarm monitor
unit/PI controller)
Error Code
System Alarm Signal
M-NET Communication State
Filter Sign
[Circulating Water Exchange
Sign]
Filter Sign Reset
[Circulating Water Exchange
Sign Reset]
Command Failure
Control
functions
High Limit/Low Limit Alarm
Night Setback control
Schedule control
Interlock control
Data
Energy management data/
management
Trend log
functions
Group Apportioned Electric
Energy
Interlocked Units Apportioned
Electric Energy
Group Apportionment
Parameter
Interlocked Units
Apportionment Parameter
PIcontroller Electric Energy
(Ch 1–4)
Pulse Input Electric Energy
(Metering device 1–4)
Other
functions
Unit of temperature setting
Cumulative operation time/
FAN operation time
Time management
BACnet
LCD lock
*1 Supports only Thermo-ON time, Thermo-ON/OFF count.
Thermo-ON/OFF count cannot be monitored from the AE-200/AE-50's LCD or web browser, but can be checked with the CSV output
function.
*2 Supports only Thermo-ON/OFF state.
*3 Alarms can occur when the upper and lower limit values are exceeded due to the AI controller (option).
WT07919X04
Item Controller function
®
router
®
BACnet function
V V
V V
V V
V V
V V
V V
— V
V
*3 V
V —
V —
V —
V V
V V
V V
V V
V V
V V
V V
V V
V —
V V
— V
V —
18
Remarks
Controllers support 4-digit error
®
codes, and BACnet supports
1- and 4-digit error codes.
These are collected individually
®
in the body/BACnet , so
sometimes the values of these
do not coincide.
®
BACnet function has only
parameters for outdoor units.
®
BACnet function has only
parameters for outdoor units.
This setting on the
AE-200/AE-50/EW-50 and
®
the one on the BACnet are
®
different. On the BACnet ,
only the unit of temperature
®
that is used for BACnet
communication can be set.