Toshiba B-EP Series Key Operation Specification page 168

6.6.9.2.4 Bluetooth Setting
6.6.9.2.4.1 Device Nickname for Assembly Process Test Setting
This setting is to identify the device nicknames.
F A C T O R Y
F A C T O R Y
Default value: OFF
<Supplemental Explanations>:
When set to "ON", the device nickname is "FACTORY TEST".
When set to "OFF", the device nickname is "TOSHIBA TEC BT".
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
T E S T O F F
[PAUSE]
T E S T O N
[PAUSE]
- 159 -
Device nickname for assembly process
test is not used.
Device nickname for assembly process
test is used.